Park Commissioner Clausen tried to defend his actions by telling the press that there were always plenty of free benches for people to sit on, except, of course, on Saturdays, Sundays and holidays. The New York Tribune pointed out that those were the days with the biggest demand for seats in the parks. As this issue became monumental, Spate became more resolute. He ordered more chairs be placed in Central Park, and also in Madison Square Park, which was across the street from his office. Some people paid to sit, and those that didn’t, were unceremoniously thrown out of the chairs by Spate’s thugs in gray suits.
”They do this in London and Paris,” Spate told Clausen. ”And it would undoubtedly be good for New York City.” Clausen saw no problem with Spate’s line of thinking, so he readily agreed; albeit without first consulting with the other member of the Park Commission. As a result, Clausen graced Spate with a five-year contract, allowing Spate to place his rocking chairs in all the New York City parks. With the ink still not dry on his contract, Spate immediately ordered 6,000 chairs, costing about $1.50 each. If Spate’s projections were correct, these chairs would earn him an estimated $250-$300 a day.
#kardiel stuart mid-century modern lounge chair & ottoman#sectional furniture#enrico mid-century modern lounge chair and ottoman#modern lounge chair and ottoman set#leisuremod zane modern lounge chair and ottoman#modern lounge chair and ottomanrating
Metal folding chairs are a lot lighter than wooden chairs or indeed chairs that don’t fold and are therefore practical for all your needs. The material you choose for your group seating chairs will depend on what the intended use is for the chairs as well as your budget. Two of the most common materials that are used for metal chairs are steel and aluminium and there are both advantages and disadvantages of both types.
After you determine the ideal height for the backrest of your chair, your next concern is making sure your thighs will fit properly on the seat. The average seat depth on any given office chair is typically about 19 inches deep, however, if you are taller most likely this means you have longer legs. Longer legs requires a longer seat to ensure that your thighs will fit properly across the entire length of the seat without a lot of extra room between the back of your knees and the edge of the seat. Some high end chair manufacturers such as ErgoCentric Seating have a special upgrade option that allows the user to choose a longer seat of 21 inches deep. Another great way to solve the problem of having a seat that is too short is to look for chairs that have a seat slider option. A seat slider allows the user to adjust the depth of the chair by pulling up on a lever generally located underneath the front of the seat. When this lever is pulled up, you can then bring the chair forward or back to make the seat either longer or shorter depending on your needs.
Aluminum Folding Chairs, If you are on a budget, aluminum chairs are the best all-around solution to your seating needs. Light in weight, these chairs are stylish and can be manufactured in a wide range of colors to meet your requirements. It must be remembered however that the light weight feel to the folding aluminum chairs will indeed be reflected in the durability of the product. If you intend to regularly use the chairs, then you may consider using a tougher metal such as steel that is sturdier and will support more weight.